Install The Software And Connect The Scanner - HP scanjet 4500c Serie Manual Del Usuario

HP Scanjet 4570c/5500c
scanner

install the software and connect the scanner

Set up your scanner in one of two ways: either install the software first or connect
the scanner first. It is recommended that you install the software first, especially on
a Macintosh computer.
install the
1
software first
2
(Windows and
Macintosh)
3
4
5
6
7
install the scanner
All manuals and user guides at all-guides.com
If you experience difficulty installing your scanner, see
problems - hp scanjet 4500c/5500c series
Close all open programs on your computer.
Locate the HP Photo & Imaging software CD-ROM that is appropriate for
your language and operating system and insert it into your computer.
For a Microsoft Windows computer: Follow the instructions on the screen.
Or, if the installation program does not start automatically:
a. On the Start menu, click Run.
b. Type: x:setup.exe (where x is the letter of the CD-ROM drive).
For a Macintosh computer: Double-click the Installation Read Me file on the
CD-ROM and follow the instructions.
If the instructions prompt you to shut down your computer, do so.
Connect the USB cable between the USB port on the scanner and the USB
port on the computer.
Connect the power cable between the scanner and a surge protector or a
grounded wall outlet that is easy to reach. This turns on the scanner.
If necessary, turn your computer on again.
A "00" in the LCD on the front panel of the scanner indicates that
a USB connection error has occurred. Check that the USB cable is
securely connected between the scanner and the computer.
TMA
APF (HP Scanjet 5500c
only)
installation
on page 13.
2