Hitachi RAS-10KH3 Manual Del Usuario página 16

2. CLEANING OF FRONT PANEL
Remove the front panel and wash with clean
water.
Wash it with a soft sponge.
After using neutral detergent, wash thoroughly
with clean water.
When front panel is not removed, wipe it with
a soft dry cloth. Wipe the remote controller
thoroughly with a soft dry cloth.
Wipe the water thoroughly.
If water remains at indicators or signal
receiver of indoor unit, it causes trouble.
Method of removing the front panel.
Be sure to hold the front panel with both hands
to detach and attach it.
Removing the Front Panel
When the front panel is fully opened with
both hands, push the right arm to the inside
to release it, and while closing the front panel
slightly, pull it out forward.
All manuals and user guides at all-guides.com
– 16 –
Attaching the Front Panel
Hole
Move the projections of the left and right
arms into the Flanges in the unit and
securely insert them into the holes.
Flange
Projection