Klarstein 10030845 Manual De Instrucciones página 10

• The heater must not be located immediately below a socket-outlet.
• DO NOT use this heater in the immediate surroundings of a bath, a shower or a swimming pool.
• WARNING: In order to avoid overheating, do not cover the heater.
• DO NOT use this heater with a programmer, timer, separate remote-control system or any other device that
switches the heater on automatically, since a fire risk exists if the heater is covered or positioned incorrectly.
• CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cutout, this appliance must
not be supplied through an external switching device, such as a timer, or connected to a circuit that is regu-
larly switched on and off by the utility.
• WARNING: This heater is not equipped with a device to control the room temperature.Do not use this heater
in small rooms when they are occupied by persons not capable of leaving the room on their own, unless
constant supervision is provided.
• Keep furniture, curtains and other fabric material away from the appliance.
• DO NOT leave the appliance unattended during use.
• From time to time, check the cord for damage. Never use the appliance if the cord or any part of the appli-
ance shows signs of damage.
• DO NOT run the mains cable under carpets, rugs etc.
• DO NOT cover or obstruct the heater in any way. Overheating will result if it is accidentally covered.
• • Never immerse the product in water or any other liquids.
• DO NOT use the appliance outdoors.
• Before cleaning the appliance, ensure it is unplugged from the power and that it is completely cool.
• DO NOT clean the appliance with abrasive chemicals.
• Never use accessories that are not recommended or supplied by the manufacturer. It could cause danger to
the user or damage to the appliance.
• DO NOT insert or allow foreign objects to enter the inlet or outlet vents as this may result in electric shock,
fire or damage to the appliance.
• DO NOT install the fire using an extension cord.
• Unplug from the mains supply if the appliance is not to be used for long periods.
Important Hints on Installation
• It should be noted that the appliance creates warm convected air currents. These currents move heat from
the room surroundings to, and up the wall surfaces adjacent to the heater.
• Installing the heater next to these types of wall coverings or operating the heater where impurities in the air,
(such as tobacco smoke) exist, may slightly discolour wall finishing.
• If the appliance is to be secure on a dry lined or timber framed construction then the integrity and ability of
the wall to secure the appliance must be confirmed. It is important in these circumstances that any vapour
barrier and/or structural members of the house frame are not damaged.
• If you are unsure of the ability of the wall to secure the appliance and/or which type of wall fixing to use,
you should take professional advice and obtain the correct fixings. Alternatively, find a more suitable wall
location.
• Do not recess any part of the appliance into the wall, or run the supply cable under carpets.
• Do not site in a position where curtains or drapes could cover the appliance, or other soft materials could
cover e.g. below a coat rack.
• Do not site behind an opening door where mechanical impact/damage could occur.
• Do not site where the supply cable would become a trip hazard.
• Do not sit, stand or forcefully pull on the appliance. Do not obstruct, cover or force items into the openings.
• Do not use the heater to dry clothes. Do not site/use in an outdoor location(s).
10