Klarstein 10030845 Manual De Instrucciones página 12

Installation
Inserting the wall plug into the wall: Gently hammer
the wall plug into position.
Offer the appliance up to the wall in it' s desired
location. Draw a mark where you wish to connect
the strap in to the wall. Remove the appliance
from the position and drill 1x hole (5.5 mm dia-
meter, 40 mm deep).
Please note: Before drilling into walls, always
check that there are no hidden wires, pipes, etc.
Make sure that screws and wall plugs supplied are
suitable for supporting the unit in your surface.
Consult a qualified person if you are not sure
Installing the appliance to the wall: Using a screw
driver screw through the fixing strap and into the
wall plug you have just installed into the wall. Secu-
ring the appliance into place.
12