Duronic BPM490 Manual De Instrucciones página 11

1.Battery powered mode:
6VDC 4×AA alkaline batteries
2.AC adaptor powered mode:
(Can be supplied by AC adaptor model
UE08WCP-060100SPA !)(Not Included) Please
unplug the adaptor to depart from the using utility power.
Note:
The adaptor socket is located on the right side of the
monitor. Make sure the socket is not obstructed.
Caution: In order to achieve the best performance and protect your monitor,
please use the authorized / specified battery and power adaptor.
The Installment And Replacement Of Battery
1. Open the battery door.
2. Insert the batteries according to the polarity
indications.
3. Close the battery door.
Replace the batteries under following
circumstances:
displays on the LCD.
The LCD display dims.
When powering on the monitor, the LCD does not light up.
Caution
Remove batteries if the device is not likely to be used for some time.
Worn batteries are harmful to the environment. Do not dispose with daily garbage.
Remove the old batteries from the device following your local recycling guidelines.
Do not dispose of batteries in fire. Batteries may explode or leak.
The Choice of Battery
11