Duronic BPM490 Manual De Instrucciones página 12

Setting the date, time and measurement unit
Please proceed to time setting before your initial use so as to ensure each
piece of record are labled with a time stamp. (Default Value: Date: 01-Jan-
2012; Time: 00:00; Measurement Unit: mm Hg)
1. When the monitor is OFF, press and hold
"User 1" button to enter Time Setting Mode.
2. As pictured in the right, the blinking
numeral "2012" representing [YEAR]. Press
"Query" button to change the numeral. Each
press will increase the numeral by one in a
cycling manner.
3. Press "User 1" button again to confirm
[YEAR]. Then the numeral representing
[MONTH] blinks.
12