Protecting The Environment - GreenWorks 20157 Manual De Instrucciones

ENGLISH
The storage temperature must always remain in the range
of +10°C to +40°C. Place the battery on a level surface.
Before using the tool after prolonged storage, fully charge
the battery again.

Protecting the environment

Separate collection. This product must not be
disposed of with normal household waste.
needs replacement, or if it is of no further use to you, do
not dispose of it with household waste. Make this product
available for separate collection.
Separate collection of used products and
packaging allows materials to be recycled and
used again. Re-use of recycled materials helps
prevent environmental pollution and reduces the
demand for raw materials.
Batteries
At the end of their useful life, discard batteries
with due care for our environment:
Do not short-circuit the battery terminals.
in a risk of personal injury or an explosion.
Run the battery down completely, then remove it from
the tool.
Batteries are recyclable. Place the battery(s) in a suitable
packaging to ensure that the terminals cannot be short-
circuited. Take them to any authorised repair agent or a
local recycling station.
2
(Original instructions)
Greenworkstools product
Technical data
Input voltage
No-load chain speed
Max cutting length
Weight
Chain Oil tank capacity
Battery
Voltage
Capacity
Type
Charger
Input voltage
Output voltage
Output current
Level of sound pressure according to EN ISO 11680-1:
Sound pressure (L ) 78 dB(A), uncertainty (K) 3 dB(A)
pA
Level of sound power according to EN ISO 3744:
Sound power (L ) 98 dB(A), uncertainty (K) 3 dB(A)
WA
Vibration total values (triax vector sum)
according to EN 60745:
Cutting freshly felled softwood (a
Uncertainty (K) 1.5 m/s
201 7
Vdc 4
m/s 7
cm 20
kg
ml 50
Vdc 4
Wh
Li-Ion
29 7
Vac 100-240V
Vdc 4
mA
) = <2.5 m/s
2
h,w
2