Operation; Start The Machine; Stop The Machine; Adjust The Length Of The Cutting Line - GreenWorks STG308 Manual Del Operador

9

OPERATION

IMPORTANT
Before you operate the machine, read and understand the
safety regulations and the operation instructions.
WARNING
Be careful when you operate the machine.
9.1

START THE MACHINE

1. Pull back on the lock-out button (1) and pull the trigger
(2).
9.2

STOP THE MACHINE

1. Release the trigger to stop the machine.
9.3 ADJUST THE LENGTH OF THE
CUTTING LINE
The machine has an auto-feed head. If the cutting line does
not automatically advance, it can be tangled or empty.
1. Start the machine and keep 3s. Release the trigger until
the machine totally stops.
2. Repeat the above step until you can hear the line-cutting
noise.
The line will extend approximately 0.4 in. with each stop
and start of the switch trigger until the line reaches the cut-
off blade and the cut-off blade cuts the excess length.
NOTE
NOTE
English
Do not pull or release the trigger too fast.
1
It will damage the machine if you hit the head to try to
advance the line.
9.4

OPERATION TIPS

Keep clearance between the body and the machine.
Do not operate the machine without guard in place.
Do these tips when you use the machine
• Keep the machine connected to the correctly worn
harness.
• Keep a firm hold with the two hands on the machine
while you operate the machine.
• Cut tall grass from the top down.
If grass winds around the trimmer head:
• Stop the machine.
• Unplug the machine.
• Remove the grass.
9.5

CUTTING TIPS

• Tilt the machine toward the area to be cut. Use the tip of
the cutting line to cut grass.
9
NOTE
NOTE
WARNING
WARNING
EN