Lighting Procedure - Tristar 1006.332 Manual De Instrucciones

WARNING: Never connect an unregulated gas cylinder to your barbecue.
IMPORTANT: Before connecting and disconnecting the barbecue to a gas cylinder make sure both of the grill control knobs are in the
OFF position.
CAUTION: When the barbecue is not in use, the gas must be turned off at the gas cylinder valve.
Connecting:

Make sure cylinder valve is closed.

Check cylinder valve features to ensure it has proper mating threads to those of the regulator. Read the instructions supplied with
the regulator to make sure of the correct connection and operation
Make sure both of the grill burner control knobs are in the "OFF" position.


Inspect cylinder valve connections port and regulator assembly. Look for any damage or debris. Remove any debris. Inspect hose
for damage. Never attempt to use damaged or blocked equipment.

Connect the regulator assembly to the cylinder valve.

Open the cylinder valve fully. Use a soapy water solution to check all connections for leaks before attempting to light barbecue. If a
leak is found, turn the cylinder valve off and do not use the grill until your local gas dealer can make repairs.
Disconnecting
Make sure both burner control valves are in the "OFF" position.
o
o
Make sure gas cylinder valve is fully closed.
o
Detach the regulator assembly from gas cylinder valve.
Connecting the Gas Cylinder

Lighting Procedure

FIG.15
37