Product Overview - Stanley LD200 Manual De Instrucciones

Contents
• Safety

• Product Overview

• Feature Set
• Keypad and LCD Icons
• Battery Installation / Removal
• Set Up
• Operation
• Specifi cations
Safety
(This product does not contain a laser. However, when
working with laser tools, obey the safety instructions for
that particular instrument)
WARNING:
• Carefully read the Safety Instructions and
Product Manual before using this product.
The person responsible for the instrument must
ensure that all users understand and adhere to
these instructions.
CAUTION:
• While a laser tool is in operation, be careful not
to expose your eyes to the emitting laser beam
(red light source). Exposure to a laser beam for
an extended time may be hazardous to your eyes.
Retain all sections of the manual for future reference.
Feature Set
Used with Line Laser Tools with Pulse Mode Option
Used with Rotary Laser Tools
4
Product Overview
Figure A -
Front and Back Views of Laser Detector
1. Bubble Vial
2. Laser Reception Window
3. Front Datum Line
4. Front LCD Display
5. Keypad
6. Speaker
7. 1/4" Thread Mount
8. Rear LCD Display
9. Alignment Hole
10. Rear Datum Line
11. Battery Compartment
Figure B -
Detector with Clamp
12. Laser Detector
13. Clamp
Figure C -
Battery Location
14. Battery Compartment Cover
15. Batteries - 2 x "AAA"
Figure D -
Connecting Detector to Clamp
16. Fixing Screw
17. Alignment Pin
Figure E -
Use with Rod
18. Measuring Rod
19. Datum Edge
20. Datum Marking Location (both left and right)
21. Clamp
LD200 RLD400
X
X
77-132 / 77-133