User Safety; Product Overview - Stanley SCL-D Manual De Instrucciones

ENGLISH
Retain all sections of the manual for future reference.

User Safety

WARNING:
• Carefully read the Safety Instructions and
Product Manual before using this product.
The person responsible for the instrument must
ensure that all users understand and adhere to
these instructions.
WARNING:
• The following labels are placed on your laser tool
to inform of the laser class for your convenience
and safety. (Text has been translated here for
your convenience)
IEC/EN 60825-1
Complies with 21 CFR 1040.10 and 1040.11 except for
deviations pursuant to Laser Notice No. 50, dated
June 24, 2007
CAUTION:
• While the laser tool is in operation, be careful
not to expose your eyes to the emitting laser
beam (red light source). Exposure to a laser
beam for an extended time may be hazardous
to your eyes.
CAUTION:
• Glasses may be supplied in some of the laser
tool kits. These are NOT certified safety glasses.
These glasses are ONLY used to enhance the
visibility of the beam in brighter environments or
at greater distances from laser source.
Contents
• User Safety
• Contents

• Product Overview

• Keypad, Modes, and LED
• Applications
8 FMHT77321
All manuals and user guides at all-guides.com
L A S E R R A D I AT I O N - D O N O T
S TA R E I N T O T H E B E A M
C L A S S 2 L A S E R P R O D U C T
Max Output ≤ 1 mW @ 630 - 670 nm
SCL-D
• Batteries and Power
• Set Up
• Operation
• Accuracy Check and Calibration
• Specifications
Product Overview
Figure A - Laser Tool
1. Keypad
2. Window for Vertical Beam Laser
3. Window for Horizontal Beam Laser
4. Pendulum / Transport Lock
5. Window for Up Beam Laser (SCL-D only)
6. Battery Cover
7. 5/8 - 11 Threaded Mount
Window for Down Beam Laser (SCL-D only)
8. 1/4 - 20 Threaded Mount
Figure B - Laser Tool Battery Location
6. Battery Cover
9. Batteries - 3 x "AA" (LR6) (Included)
Figure C - Pendulum / Transport Lock Positions
Figure D - Keypad Configurations
Figure E - Laser Modes
Figure F - Pulse Mode
Figure H - Level Beam Accuracy
Figure I - Horizontal Beam Accuracy
Figure J - Vertical Beam Accuracy
Figure K - Up and Down Beam Accuracy