Product Overview; User Safety - Stanley SPL3 Manual Del Usuario

ENGLISH
Contents
• User Safety
• Contents
• Product Overview
• Keypad, Modes, and LED
• Applications
• Batteries and Power
• Set Up
• Operation
• Accuracy Check and Calibration
• Specifications

User Safety

WARNING:
• Carefully read the Safety Instructions and Product
Manual before using this product. The person
responsible for the instrument must ensure that all
users understand and adhere to these instructions.
CAUTION:
• While the laser tool is in operation, be careful not
to expose your eyes to the emitting laser beam
(red light source). Exposure to a laser beam for an
extended time may be hazardous to your eyes.
CAUTION:
• Glasses may be supplied in some of the laser tool
kits. These are NOT certified safety glasses. These
glasses are ONLY used to enhance the visibility of
the beam in brighter environments or at greater
distances from laser source.
Retain all sections of the manual for future reference.
WARNING:
• The following label samples are placed on your laser
tool to inform of the laser class for your convenience
and safety. Please reference the Product Manual
for the specifics on a particular product model.
8
L A S E R R A D I AT I O N - D O N O T
S TA R E I N T O T H E B E A M
C L A S S 2 L A S E R P R O D U C T
Max Output ≤ 1 mW @ 630-680 nm
IEC/EN 60825-1
Complies with 21 CFR 1040.10 and 1040.11
except for deviations pursuant to Laser
Notice No. 50, dated June 24, 2007.

Product Overview

Figure A - Laser Tool
1. 1/4-20 threaded mount
2. Laser Window
3. Power /Pendulum Lock Switch
4. Slots for Quick Link Bracket Connect
5. LED/Out-of-Level Indicator
Figure B - Laser Tool Battery Location
6. 2 x AA Batteries
7. Battery Cover
Figure C - Power /Transport Lock
Figure D - Laser Modes
Figure E - Quick Link Bracket Assembly.
9. QuickLink Bracket
Figure F - Quick Link ™ Bracket Detail
Figure M - Vertical Beam Accuracy
Figure N - Horizontal Beam Accuracy
STHT77342