Fitting The Cleaning Cloth - EASYHOME DM 2012 Manual Del Usuario

3. Insert the handle
steam trigger
handle is aligned with the hole in the main unit.
4. Using the long Phillips-head screw

Fitting the cleaning cloth

1. Place a cleaning cloth
the cloth matches that of the cleaning head
ing head on top of the cloth.
2. Pull the sides of the cleaning cloth up around the cleaning
head.
3. Squeeze and hold the plastic fastener while pulling the cord of the cleaning
cloth tight around the cleaning head, then release the fastener.
The steam mop is now assembled.
Additional cleaning cloths can be ordered from the customer
service department.
AFTER SALES SUPPORT
1-800-886-8506
USA
into the hole of the main unit, making sure that the
1
2 faces the rear of the steam mop and the hole in the
1
8 on the floor. Make sure the triangular shape of
8
Before using the steam mop
15 , fasten the handle to the main unit.
, and then place the clean-
7
USA
15
www.aldi.us