Using The Steam Mop - EASYHOME DM 2012 Manual Del Usuario

3. Remove the water tank funnel and close the water tank plug.
To attach the water tank to the main unit, proceed as follows:
− Place the water tank back on the main unit, sliding it down into
place until it fits snugly.

Using the steam mop

NOTICE!
Risk of damage!
Using the steam mop on floors and carpets not suitable or not
designed for steam cleaning may damage them.
− Do not use the steam mop on floors that have been
waxed, or on unsealed wood surfaces.
− Never use the steam mop for a long period of time in the
same place on wood floors, this could cause the wood to
deteriorate or swell.
− Never let the steam mop stay in one place too long,
especially when the steam function is activated, as this
could damage the floor and/or leave limescale stains.
− Be especially careful if you use the steam mop on
heat-sensitive floors or floors with heat-sensitive material.
− If you are unsure about the suitability of a floor for steam
cleaning, consult with a trained professional before using
the steam mop.
− If necessary, test the steam mop on a small, inconspicuous
part of the floor to be cleaned.
NOTICE!
Risk of damage!
Using the steam mop without water may damage it.
− Always make sure there is enough water in the water
tank.
− Never use the steam mop without water being in the
water tank.
AFTER SALES SUPPORT
1-800-886-8506
USA
USA
Using the steam mop
www.aldi.us
17