Decalcifying; Troubleshooting - EASYHOME DM 2012 Manual Del Usuario

Decalcifying

Depending on the hardness of the water, steam may not properly flow out of
the steam mop due to a build-up of limescale in the steam outlet. Therefore, it
may become necessary to decalcify the steam mop from time to time.
To decalcify the steam mop, proceed as follows:
1. Remove the cleaning cloth
2. Remove the cleaning head from the main unit
tached short Phillips-head screw
apart.
The steam outlet on the bottom of the main unit is now accessible.
3. Insert the long end of the cleaning pin
bottom of the main unit and move it back and forth to remove any existing
limescale.
4. Reattach the cleaning head to the main unit by following the instructions in
the chapter "Assembling the steam mop".

Troubleshooting

The following notes should help you fix any malfunctions. Should this not be
the case, please contact our customer service department as listed on the war-
ranty card and they will gladly help you. A PDF version of this user manual can
also be ordered.
Problem
The indicator light is not
on.
The steam mop is not
producing any steam.
AFTER SALES SUPPORT
1-800-886-8506
USA
8 from the cleaning head
, and then pulling the two sections
14
13
Possible cause
The steam mop is not
connected to the mains.
The water tank is not in-
serted correctly or filled
with enough water.
The steam trigger has
not been squeezed.
7 .
5 by unscrewing the at-
into the steam outlet on the
Solution
Plug the steam mop
into the mains outlet.
Make sure the water
tank is filled and
correctly inserted.
Squeeze once, to ac-
tivate the the steam
function.
USA
Troubleshooting
21
www.aldi.us