Instructions Before Use - Aigostar 30KYE Manual De Instrucciones

Tabla de contenido

Idiomas disponibles

Structural diagram of float valve

Tips:

Confirm that the float valve, block proof cover and seal ring

are correctly installed before use each time;

Before putting the inner pot into the cooker each time,

please remove the dirt and water from the external side of

the inner pot and internal side of the external pot;

Please move the product with the handle of the cooker body;

Please remove the water from the housing cover with cloth.

Note:

① Exhaust valve: Pull out the exhaust valve from the lid.

Clean the internal side of the exhaust valve and

the exhaust valve and float valve of the lid with brush and

cloth at least once a month.

② Sealing gate: Please remove oil and dirt from the sealing

gate with detergent and brush. The remained

oil and dirt in it may appear in yellowish. After washing, it

may recover to the original color as stainless steel. It is

suggested to clean the sealing gate once every 2 months.

③ Water box: After cooking, the steam may stay in the water

box of the external pot as water. Water in

the box should be removed for avoiding bad odor, please

clean it with clean cloth.