Aigostar 30KYE Manual De Instrucciones página 7

Optional pressure maintaining function
This function allows adjusting the pressure level according to
the personal requirement by pressing "Pressure Level"
button, it requires entering into the "Manual Setting" state.
Cooking Timer Function
If the pressure maintaining time is adjusted by pressing
"+"/"-" button, it requires entering into the "Manual
Setting" state.
Delay Timer Function
Set the time of finishing cooking by pressing the "+"/"-"
button.
Disassemble and install the block proof cover and
seal ring
Disassemble and install the block
proof cover
Disassemble:
Pull it out upwards
Install:
Press it down to install
1.Check if the seal ring and block proof cover are correctly
installed in the upper cover before use each time.
2.After use, please clean the seal
ring and around of block proof cover for avoiding jamming
the cover, keep it clean to avoid bad odor.
9
Disassemble and install the seal
ring
Disassemble:
Pull it out upwards
Install:
Press it down to install
1.Please do not pull the seal ring, otherwise, the distorted seal
ring may influence the seal ring and pressure effect.
2.Do not use the damaged seal
ring, please replace it at the authorized repair office.
Use and maintain the inner pot
1.Do not empty
It may cause yellowish and spotted inner pot or distorted
bottom if it is empty for a long time.
2.Do not use it to store the acid, alkali and preserved foods
for a long period.
Although the inner pot has excellent anti-corrosion
performance, it may cause corrosion of certain degree, the
suggested time of keep warm shall not exceed 2h.
3.Keep it clean to prolong the service life. Do not immerse it
in water for a long period.
Clean the inner pot with soap, weak detergent or warm water
to remove dust, oil and dirt.
4.Do not use a metal shovel or other harder tool, otherwise it
will damage the inner surface of pot.
10