Messages; Programación Del Controlador Tau - Stanley Tau Manual Del Usuario

Communications!
Transducer Current Transducer current has fallen outside nominal values. For E series tools
Fault that is 15.74 mA +/- 75% (4.5 – 26mA). For EA series tools that is 4.16
mA +/- 75% (1 to 7mA).
Transducer Zero The transducer zero point has shifted too far for the controller to
Fault! compensate. These points are visible on the controller diagnostics screen
under Analyze.
Unsupported The wrong tool type has been connected to the controller. The Tau
Herramienta! controller cannot run the tool that is connected.

2.6 Messages

Messages appear on the screen when certain non-critical conditions exist that asserts the warning.
Herramienta Update Failed
2.7 Programación del Controlador Tau
CONDICIÓN DE PAR DE TORSIÓN EXCESIVO
Para evitar lesiones:
•
Sólo personal entrenado y calificado debe programar controladores.
•
Nunca configure límites de control arriba del índice máximo de la herramienta.
•
La configuración de límites de control arriba del índice máximo de la herramienta puede
causar alto par de torsión de reacción.
•
Pruebe siempre con respecto a la operación adecuada de la herramienta después de la
programación del controlador.
Six keypad buttons enable acerca display and
Button
Job
Use to program tool strategy such as torque parameters, thread direction, minimum
angle limits and abort time.
Herramienta
Use to modify parameters for tool multi-function button (MFB), headlights and
Preventive Maintenance counter functions.
Speed
Use to program tool speed for free runs and downshifts.
E/S
Use to set parameters for entrada y salida (E/S) functions.
Acerca
Use to get acerca about the tool and controller firmware version and language
selection.
Diagnostico
Use to diagnose and force the E/S functions.
To begin programming a herramienta strategy, press one of the
Icono Legend
12
Controller failed to update the tool configuration.
A D V E R T E N C I A
programming:
Descripción
Icono Descripción
Press to activate function assigned to button.
Keypad Buttons
Left/Right Navigate tabs as well as backspace and
Arrow Keys space.
Scroll through menu, number and character
Up/Down Arrow
selection.
Keys
User Manual
keypad buttons.
Navigation