Stanley Tau Manual Del Usuario página 38

Outputs Description
CYCLE NOK Asserts when a tightening cycle that exceeds the Threshold Torque is completed and the
achieved torque and angle are audited outside the limits of the audit step. Resets when the
tool exceeds Threshold Torque on the next tightening cycle. The size of this output
function is 1 bit.
Configuration:
Contact Type
READY Asserts when the controller is energized and there are no faults and there is nothing
disabling the tool, such as Error Proofing or a Stop input. See section 2.2.6 for the
conditions that can Stop Herramienta Operation. Resets when the controller is turned off
or there is anything stopping the tool from operating. The size of this output function is 1
bit.
Configuration:
Contact Type
34
User Manual