Configuring The Channel Menu - JVC LT-43HW95U Manual Del Usuario

Menu Operation

Configuring the Channel Menu

■ Antenna Type: Selecting an antenna source.
※ When TV signals is Air.
■ Auto tuning: Press the OK button to
enter sub-menu.
– Tune Type: Press the ▲/▼ button to
select tune type: DTV+ATV, DTV, ATV.
– Country: Press the ▲/▼ button to
select country.
– Search: Press the OK/► button to
start the auto searching.
Once the progress bar is full, the found
channels will be stored and the unit
will proceed to the search for DTV, TV, Radio and Data.
If you press the MENU ( ) button in TV searching, the Auto Tuning will skip to DTV
searching as the suggestive picture shows.
■ DTV Manual Tuning: Manual store for digital
channels.
1. Press the ◄/► button to select channel.
2. Press the OK button to start channel tuning.
When a channel is found, the searching
process will stop; the channel will be saved with
current channel number. Press the EXIT (
button to exit.
※ When TV signals is Cable.
■ Auto tuning: Press the OK button to enter sub-menu.
– Tune Type: Press the ▲/▼ button to select tune type: DTV+ATV, DTV, ATV.
– Operator: Press the ▲/▼ button to select Operator.
– Country: Press the ▲/▼ button to select country.
– Search: Press the OK button to enter search settings.
• Tuning Mode: Press the◄/►button to select Tuning Mode: Full or Quick.
– If you select Full, the Auto Tuning will search through all frequencies to find
available channels.
– If you select quick, the Auto Tuning will search through appointed frequencies to
find available channels.
• Frequency: Press the◄/►button to select Frequency: Auto or enter digital
numbers.
• Modulation: Press the◄/►button to select Modulation: Auto, 16QAM, 32QAM,
64QAM, 128QAM, 256QAM.
• Symbol: Press the◄/►button to select Symbol Rate: Auto or enter digital
numbers.
• Network ID: Press the◄/►button to select Network ID: Auto or enter digital
numbers.
• Search: Completion of the above settings and press the OK/► button to start the
auto searching.
Menu
Channel
Channel
Antenna Type
Picture
Auto Tuning
Sound
DTV Manual Tuning
Network
ATV Manual Tuning
Option
Programme Edit
Lock
Signal Information
Timer
CI Information
Dynamic Rescan
Bad
)
Back
20
DTV Manual Tuning
VHF CH 8
DTV 0
Press [OK] to search
Normal Good
Exit