JVC LT-43HW95U Manual Del Usuario página 34

Menu Operation
If an USB device dedicated to recording is disconnected, Time Shift files that were
saved will automatically be deleted.
NOTE:
When using the PVR/Media function, remember the following important points:
 You should use a USB disk with at least 4GB capacity.
 The connected USB device must support 2.0 speeds.
 We strongly recommend you back up all data in the USB storage device o another
storage device so you do not risk losing any data in case of an unexpected device
failure or accident. We do not assume liability for any loss of data due to misuse or
malfunction. Data backup is your personal responsibility.
 You cannot change to a channel from another broadcaster or select another function
while in recording mode.
 If the signal is interrupted or removed while in recording mode, the recording will stop
until the signal is established. This may cause you to lose program content.
 Do not turn the TV off during recording, otherwise the TV will exit the time-shift
function and turn to standby mode.
 Some USB storage devices may not be compatible for smooth operation with this TV.
 For large file sizes and large capacity storage devices, the loading speed may be
longer. The recognition speed of a USB storage device may vary depending on the
device.
 When connecting or disconnecting the USB storage device, ensure the TV is not in
USB mode, otherwise the USB device or the files stored in it may be damaged.
■ Subtitle: Switch the Subtitle function on or off.
■ Subtitle Hearing Impaired: When hearing Impaired is ON, the TV screen will give
some information to the people whose hearing are impaired when Hearing Impaired
is Off, the information will be hidden.
■ Audio Languages: Select you're preferred audio language. (Available for digital
channels if multiple audio languages are broadcasted.)
■ Subtitle Languages: Select your preferred subtitle Language. (Available for digital
channels if multiple subtitle languages are broadcasted.)
■ Upgrade: You can select USB Upgrade or Network Upgrade.
– USB Upgrade: Update the software using the USB memory device. Please be
careful not to disconnect the power or remove the USB drive until updates are
complete.
– Network Upgrade: To use network upgrade, you must have configured your TV to
connect to your network and the TV must be connected to the Internet.
■ Country: Press ▲/▼ buttons to select the country you want to.
CH 8 MOVING1
MOVING1
00:00
00:00
Play
Stop Pause FB
32
00:05
31
TimePlay
FF