Beha-Amprobe AT-8000-EUR Manual De Instrucciones página 11

2. KIT COMPONENTS
Main
applications
Help guide
Setting menu
Buzzer volume adjustment
Home menu
Language
Backlight
Setting
Help Guidance
Sensitivity*
Smart Sensor
TM
Range
*Note: The Auto and Manual sensitivity mode can be easily changed by pressing the + and
– key at the same time when the Receiver is in a tracing mode. When sensitivity mode is set
to "Auto" manual adjustment is disabled.
ENERGIZED:
DE-ENERGIZED:
Figure 2.1b: Overview of home screen elements
2.8.6
Figure 2.1c: Overview of settings menu elements
Select desired language
25%, 50%, 75%, 100%
DEFAULT : Restore default settings
ON : Device will guide you through each mode
OFF : Device will start without guidance
MAN : Manual sensitivity adjustment (+) and (-) keys
AUTO : Auto sensitivity adjustment
SHORT : For wire detection up to 1 m
LONG : For wire detection between 3 and 6 m
- -
Sensitivity adjustment
1.7
7
Battery
status