Beha-Amprobe AT-8000-EUR Manual De Instrucciones página 8

1. PRECAUTIONS AND SAFETY MEASURES
Symbols used in this product
99
SIGNAL
MAN/AUTO

�
T
J
CAT IV 600V
I
)
P
=
Battery status – Displays the remaining battery charge.
Home – Return to home screen when selected.
Help – Enters to the help guide when selected.
Settings – Enters to the settings menu when selected.
Indicates the volume is muted.
Volume – Displays the volume in four levels.
Sensitivity indicator – Displays the sensitivity level from 1 to 10.
Icon indicating energized system.
Icon indicating de-energized system.
Signal strength indicator – Shows the strength of the signal
from 0 to 99.
Shows whether the sensitivity adjustment is in Manual or Automatic mode.
Lock indicates if the Auto sensitivity lock is active
(Only in Auto sensitivity mode).
Application and removal from hazardous live conductors permitted.
Caution! Risk of electric shock.
Caution! Refer to the explanation in this Manual.
The equipment is protected by double insulation or reinforced insulation.
Earth (Ground).
Overvoltage up to Category IV 600V (transient protection up to 8 kV).
Fuse.
Conforms to relevant North American Safety Standards.
Complies with European Directives.
Conforms to relevant Australian standards.
This product complies with the WEEE Directive marking requirements. The
affixed label indicates that you must not discard this electrical/electronic
product in domestic household waste. Product Category: With reference
to the equipment types in the WEEE Directive Annex I, this product is
classed as category 9 "Monitoring and Control Instrumentation" product.
Do not dispose of this product as unsorted municipal waste.
4