I/O Connections; Input - Desoutter ESP-CA Serie Manual De Instrucciones

6159932380
Issue no: 05

6. I/O CONNECTIONS

6.1. Input

Pin Function
1 COM 0VDC
2 START
3 REVERSE
4 NEW CYCLE
5 STOP
MOTOR
6 RESET CYCLE
7 PRINT LABEL
8 PR1
9 PR2
10 PR3
11 PR4
12 PR5
13 PR6
14 PR7
15 PR8
16 24 V
DC
14 / 296
Comment
Input signals: contact to earth common pin 1
Contact between pin 1 and 2. Clockwise
Contact between pin 1 and 3. Counterclockwise
Used only if NEW PR is set on YES
Contact between pin 1 and 4 to start a new cycle
Contact between pin 1 and 5; it stops the motor in any situation.
On the screen, you'll see STOP MOTOR.
Contact between pin 1 and 6.
It resets any partial values of the cycle you are working in
Contact between pin 1 and 7: it prints on request the 50 letters label
(see PRINT DESCRIPTIONS, SETUP PRINT).
Contact between pin 1 and 8-15, to choose the desired programs
(possible only with EXT program).
24 Vdc protection for switchbox and socket tray (max 250mA available).
N.B. This output can be used but the protection treshold of 250mA must
be valid for all the outputs. If exceeded, on the first screen, you'll see
PROTECTION ACTIVATED PLEASE RESET. It is necessary to switch off
the unit for 6 sec.
05/2020