Protecting The Environment - Black and Decker CS3651LC Manual De Instrucciones

Accessories
The performance of your tool depends on the accessory
used. BLACK+DECKER and Piranha accessories are
engineered to high quality standards and designed to
enhance the performance of your tool. By using these
accessories you will get the very best from your tool.
This tool uses screwdriver bits with a 1/4" (6.35 mm)
hexagonal shank. Piranha Super-lok accessories are
designed for use with this tool.
Maintenance
Your BLACK+DECKER tool has been designed to operate
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper
tool care and regular cleaning.
Your charger does not require any maintenance apart from
regular cleaning.
Warning! Before performing any maintenance on the tool,
unplug the charger before cleaning it.
Regularly clean the ventilation slots in your tool and
u
charger using a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth.
u
Do not use any abrasive or solvent-based cleaner.
Regularly open the chuck and tap it to remove any
u
dust from the interior.

Protecting the environment

Z
Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste.
Products and batteries contain materials that can be
recovered or recycled reducing the demand for raw
materials.
Please recycle electrical products and batteries according
to local provisions. Further information is available at
www.2helpU.com
(Original instructions)
Technical data
Voltage V
No-load speed min
Hard stall torque Nm
Max. torque Nm
Bit holder mm
Weight kg
Battery
Voltage
Battery type
AHr rating
Charger
Voltage
Approx. charge time
Weight
Level of sound pressure according to EN 60745:
Sound pressure (L ) 60 dB(A), uncertainty (K) 3 dB(A)
pA
Sound power (L ) 71 dB(A), uncertainty (K) 3 dB(A)
WA
Vibration total values (triax vector sum) according to EN 60745:
Screwdriving without impact (a
h, IS
EC declaration of conformity
MACHINERY DIRECTIVE
CS3651LC - screwdriver
ENGLISH
CS3651LC (H2)
3.6
DC
-1
180
5.84
5.0
6.35 (1/4")
0.32
V 3.6
Li-Ion
1.5
SSC050015UK
V 230
AC
h 10
0.14
kg
2
) 0.3 m/s , uncertainty (K) 1.5 m/s
2
9