Tabla de contenido
Publicidad
Bode 100 Quick Start Guide
2.3
Designated use
Bode 100 and its accessories are especially designed for swept frequency measurements of
electronic circuits in laboratory and manufacturing environments.
Typical applications are:
•
Measurement of the complex transfer function of amplifiers, filters and attenuators
•
S-Parameter measurement in the 50 Ω domain
•
Stability assessment of control loops
•
Determination of resonance frequencies of piezo elements and quartz crystals
•
Impedance measurement of inductors, capacitors and resistors
Disclaimer
The advisory procedures and information contained within this document have been compiled as a
guide to the safe and effective operation of Bode 100. It has been prepared in conjunction with
application engineers and the collective experience of the manufacturer. The in-service conditions for
the use of Bode 100 may vary between customers and end-users.
Consequently, this document is offered as a guide only. It shall be used in conjunction with the
customers own safety procedures, maintenance program, engineering judgment, and training
qualifications.
Using Bode 100 or its accessories in a manner not specified by the manufacturer may result in
damage to property or persons.
2.4
Cleaning
Use a cloth dampened with isopropanol alcohol to clean Bode 100 and its accessories.
8
OMICRON Lab
Publicidad
Tabla de contenido
