Stihl MS 192 T Manual De Instrucciones página 32

When engine begins to fire
If engine is cold:
: Set the choke lever (5) to j and
continue cranking until the engine
runs.
If engine is warm:
: Continue cranking until the engine
runs.
MS 192 T, MS 192 TC
As soon as the engine runs
: Blip the throttle trigger (3), the
Master Control lever (4) moves to
the run position # and the engine
settles down to idling speed.
.
As the chain brake is still engaged,
the engine must be returned to idle
speed immediately or the engine
housing and chain brake might
otherwise be damaged.
English / USA
: Pull the hand guard back toward
the handlebar:
The chain brake is now disengaged
– your saw is ready for operation.
Always disengage chain brake
before accelerating engine. High
revs with the chain brake engaged
(chain locked) will quickly damage
the engine and chain drive (clutch,
chain brake).
: Observe safety precautions.
: Always check operation of chain
lubrication before starting work.
31