Special Safety Instructions For The Spray Attachment; Further Safety Directions - Deltafox DG-CGC 1080 Traducción Del Manual De Instrucciones Original

f) Wear suitable clothing and work
clothes when working with the equip-
ment. Do not hold the equipment
by the cutting blade or lift it on the
cutting blade. Contact with the cutting
blade can cause injuries.
Special safety instructions for
the spray attachment
a) Keep the spray attachment away
from children.
b) Only use the spray attachment in
well-ventilated surroundings.
c) Spray with the direction of wind,
away from people, animals and
foodstuffs.
d) Do not eat or drink while working
with the spray attachment.
e) Do not aim the spray attachment at
open flames.
f) Observe location regulations.
g) Avoid operating the spray attach-
ment while empty.
h) Observe all the instructions provi-
ded for the plant protection agent
that you use in the spray attach-
ment. Wear protective googles and
gloves, or other recommended perso-
nal protective equipment, if required.
i) Do not use any hot, corrosive, flam-
mable, caustic or heat-producing
liquids in the spray attachment.
j) Keep hands and arms away from
the nozzle while the spray attach-
ment is in operation.
k) If you come into contact with che-
micals, proceed in accordance
with the instructions of the product
used and seek medical assistance
immediately.

Further safety directions

Warning! Children, individuals with
limited physical, sensory or mental
capabilities, as well as those who
have insufficient experience or
knowledge or are not familiar with
the instructions must never be
permitted to use the device. Local
regulations may specify an age
restriction for the user.
The device must never be used if
people – especially children – or
pets are nearby.
For your personal safety:
Wear suitable work clothes such
as boots with non-slip soles, sturdy
long trousers, gloves and goggles.
Hearing protection must be used
in case the device is used over
prolonged periods of time. Do not
wear long flowing clothing or je-
wellery, as this may be caught by
moving parts. Do not use this tool
while walking barefooted or while
wearing open sandals.
a) Only switch on the tool when
hands, feet and all other body parts
are at a secure distance to the tool.
Risk of injury from cuts.
b) Take care that you do not injure
your hands and feet with the cut-
ting elements.
c) Remove the power supply unit be-
fore working with the equipment.
Do not use extension cables. The
power supply unit is to be used
only in enclosed spaces. Water
entry increases the risk of electric
shock.
GB
67