Operation Preparation; Operation; Remote Control Operation - Aspects LW109B Manual Del Usuario

Remote Control Operation

STANDBY
During normal playback, press this button to
switch the player to Standby status, and press
it again to resume to normal condition.
Note: When the player is not going to be used
for a long time, it is better to turn it off and cut off
the supplier.
OPEN/ CLOSE
Press this button to open or close the disc tray
for loading or unloading a disc. When the tray is
opened, word "OPEN" will appear on top left of
the monitor screen;
"CLOSE" and "Loading" will appear sequentially
when the tray is closed.
NUMBER (0-9)
During playback of a disc, if you want to choose
a preferred track or chapter to view, press a
numeric button (0-9) and SELECT button
sequentially.
SLOWF/ SLOWR
Press SLOWF/ SLOWR button during playback
to activate slow playback function either for-
ward or backward, which supports 4 levels of
speed: 1/2, 1/4, 1/6 1/8. Press PLAY button to
resume to normal play.
Note: Some discs do not support such function.
VOL+/VOL-
During playback, press either button to bring up
the volume adjustment box, which is designed
to control the mains volume output as a whole
so as to adapt the volume size for each channel.
Note: The Volume adjustment will be invalid for
all disc when the audio signal output is digital.
ZOOM
During playback or in Pause status, press ZOOM
button tol zoom in particular picture at 3 levels:
x1, x2, x3.
Note: Some discs have no such function or have
only one zooming level of x1 orx2 level.
MUTE
Pressing MUTE button during playback, the player
shows MUTE on the monitor screen and there
will be no audio output (silent). Press it again or
VOL+/ VOL- button to cancel MUTE operation.
F.FWD/ F.RWD ( / )
Pressing F.FWD/F.RWD button during playback
will change the forward / rewind speed of
playback. Repeated presses shall shift the speed
ranging from 2x, to 4x, 8x, and 16x. To exit or
cancel fast motion and resume to normal
playback, press PLAY button either on the player

OPERATION PREPARATION

or the remote control.
Note: JPEG disc does not support such function.
During playback, pressing SKIP-/SKIP+ button on
the remote control or the front panel each time
shall enable to skip backward or forward a chap-
ter (DVD) or a track (CD) or a frame (Picture CD)
correspondingly.
During playback one press of PAUSE/BAND but-
ton will switch the player to Pause status. If
each more press is made, the playback shall
advance by one frame /step. To resume to nor-
mal play, press PLAY button.
Note: Certain sort of discs do not support Step
function.
PLAY
When the player is reading a disc, press this
button to play the disc; when the player is in
Pause or Stop status, you can press the button
to resume to normal playback.
STOP
Press STOP button to stop playing during the
playback. Once the playback is stopped, the
player will memorize the condition when STOP
is pressed). Press PLAY to resume to normal
playback from the stop point. Press STOP but-
ton twice, memory function will be cancelled.
The player will start playback from the very
beginning. Such memory function only applies to
the discs of which the elapsed time can be
shown on this player.
SETUP
Press this button to enter Setup interface where
you can set the Menu items one by one. Once
the new settings are completed, the player will
work under new condition (esp. when a DVD
disc is loaded). The new settings remain even if
the power is cut off.
RETURN
When playing VCD, SVCD discs with PBC func-
tion activated, press RETURN to get back to the
Main Menu.
OK
Press this button to confirm certain menu opera-
tion or numeric input.
DISPLAY
Press DISPLAY button during the playback to
show some related information of the disc ( e.g.
elapsed time, total length, chapter, playback sta-
tus etc.).
- 71 -
SKIP-/SKIP+ ( / )
PAUSE/ STEP