together;
If you choose RGB, the video signal will be out-
put via Europe SCART;
If you choose P-SCAN, the video signal will be
output via YUV jacks in P-SCAN mode.
Remarks: No matter what is the choice, video
signal can be output in CVBS mode.
Smart Picture
There are 4 options available here: Standard/ /
Bright/ Soft/ Dynamic. Use Up/ Down button to
make a choice, and OK to confirm.
If choose Standard, the picture will be displayed
normally;
If choose Bright, the picture will be displayed
with default brightness;
If choose Soft, the picture will be displayed with
soft effect;
If choose Dynamic, the picture display can be
finely adapted in the following ways: Brightness/
Contrast/ Saturation/ Hue. Press Left/ Right but-
ton to adjust the picture display to the best effect.
3. Audio
There are 11 submenu items under this directory:
Bass Management
Front Speakers
Center Speakers
Surround Speakers
Subwoofer
Test Tones
Center Delay
Surr. Delay
Digital Output
Night Mode
Pro Logic
OPERATION
3.1 Bass Management
Move here, choose either option out of the two:
On/Off, then press OK to confirm.
3.2 Front Speakers
Two options available here: Large/ Small. Use
Up/ Down button to make a choice, and OK to
confirm.
3.3 Center Speakers
Three options available here: Large/ Small/ None.
Use Up/ Down button to make a choice, and OK
to confirm.
3.4 Surround Speakers
Three options available here: Large/ Small/ None.
Use Up/ Down button to make a choice, and OK
to confirm.
3.5 Subwoofer
Two options available here: None /Present. Use
Up/ Down button to make a choice, and OK to
confirm
If choose None, there will be no output from
subwoofer;
If choose Present, subwoofer output will be
activated.
3.6 Test Tones
Seven options available here: Off/ Front Left /
Front Right/
Center/ Surr. Left/ Surr. Right/ Subwoofer. Use
Up/ Down button to make a choice, and OK to
confirm
If choose Off, the test will be deactivate;
If choose F.L, noise is output from only the F.L
speaker;
If choose F.R, noise is output from only the F.R
speaker;
If choose Center, noise is output from only cen-
ter speaker;
If choose S.L, noise is output from only the S.L
speaker;
If choose S.R, noise is output from only the S.R
speaker;
- 76 -