Alcad PDK-64711 Manual Del Usuario página 22

TYPE OF INSTALLATION AND RANGE OF PROGRAMMING CODES OF TELEPHONES/ CONNECTION BRACKETS
If you wish to assign a number between 1 and 9999 to the telephones/connection brackets, or if the panel is going to be working in an installation
which is not standard, you will have to reconfigure the entrance panel before programming these devices. See "Configuration of the entrance
panel according to the installation".
These parameters can be adapted at any time, before or after programming the equipment. See page 26.
Ces paramètres peuvent être adaptés à tout moment, avant ou après la programmation de l'équipement. Voir page 26.
VISITOR: SCREENS
Modify the factory default screen options on page 27.
Enable a menu which makes it possible for a third party (the administrator) to perform small modifications in the electronic directory. See page
35.
See page 31.
CONFIGURATION OF THE ENTRANCE PANEL ACCORDING TO THE INSTALLATION
ESTATE WITH SEVERAL BUILDINGS
Note: For each building, determine the main entrance panel; panel from which the connection brackets/telephones will be programmed.
BUILDING 1 BUILDING 2
ACCESO EXTERIOR
EXTERNAL POINT OF ENTRY
ACCÈS EXTÉRIEUR
2 - W I R E
CONFIGURATION OF THE ENTRANCE PANEL
OPERATING PARAMETERS
ENABLE ADMINISTRATOR MENU
CHANGE THE MASTER CODE
See "Housing compound: configuration of entrance panel of building. Keypad panel", page 23
BUILDING 3
See "Housing compound: configuration of external access entrance panel", page 25
D O O R E N T R Y S Y S T E M S