Alcad PDK-64711 Manual Del Usuario página 25

HOUSING COMPOUND: CONFIGURATION OF THE EXTERNAL ENTRANCE PANEL
Note: If there is only an external panel, it must be configured as the main entrance panel. When there are several external panels, configure
one of them as the main panel and the others as secondary panels.
CONFIGURATION OF THE EXTERNAL MAIN ENTRANCE PANEL (E P)
Description
Location
Type of panel
Panel number
Numbre of buildings
Range of codes
CONFIGURATION OF THE EXTERNAL SECONDARY ENTRANCE PANEL (E S)
Description
Location
Type of panel
Panel number
Numbre of buildings
Range of codes
To make a call to the telephone of a building from the exterior entrance panel, key in “Number assigned to the main panel of the building + telephone code”.
For example: To make a call to the telephone with code ‘001’ of the building number ‘17’, key in ‘17001’. To make a call to the same telephone from the
building, it will be possible to key in the code ‘17001’ or ‘1’, depending on the value selected in position 8 of that panel, ‘5’ or ‘3’.
Assign a different number to each secondary entrance panel
2 - W I R E
INSTALLATION PARAMETERS
Default value
BUILDING
MAIN
Default value
BUILDING
MAIN
D O O R E N T R Y S Y S T E M S
Value to be chosen
EXTERNAL
MAIN
Value to be chosen
EXTERNAL
SECONDARY
This changes the value in…
Configuration
Definition of panel
This changes the value in…
Configuration
Definition of panel