After Operation; Disconnect The Compressed Air Supply; Emptying Magazine - Prebena 1GP-A16 Manual Del Usuario

After operation

After operation
After use or prior to prolonged shutdowns, perform the steps
described below.

Disconnect the compressed air supply

 Switch off the compressor.
 Pull the quick coupler of the air hose away from the handle.
The quick coupler is now released.
 Remove the air hose from the connection at the tacker.
The compressed air contained in the tacker escapes audibly.

Emptying magazine

 Open the magazine as described on page 16 ff.
 Remove the remaining fasteners.
 Ensure that there are no more fasteners in the magazine and shot
channel.
 Close the magazine as described on page 17 ff.
22