Driving In Fasteners - Prebena 1GP-A16 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 74
Operating the tacker

Driving in fasteners

Risk of injury due to electric shock.
 Before triggering the tacker, always ensure
During operation, injuries to the eyes and other
body parts are possible due to flying splinters.
Always wear safety goggles during operation and suitable
protective clothing.
Observe the valid work protection regulations.
 Wear suitable ear protection.
 Observe the valid noise protection regulations.
 Select the lowest possible operating pressure.
Risk of injury when nails slide off or are driven in
too far or due to kickback.
 Only use the tacker for wooden objects.
 Ensure that the driving depth is not set deeper than the
thickness of the piece of wood.
 When triggering, press the tacker firmly against the wood
When fasteners are driven into workpieces that are too hard, or into
other fasteners, a powerful kickback is generated. This can cause
the tacker to slip off.
20
WARNING
that a power supply line cannot be struck.
WARNING
WARNING
Loud operating noises can cause damage to
hearing.
WARNING

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

1gp-d161gp-v161gp-xa161gp-a16ln501gp-v16ln50

Tabla de contenido