Safety Rules To Avoid The Explosion Possibility; Safety Rules To Avoid The Fire Possibility; Safety Rules To Avoid The Compressor Failure - Prebena AEROTAINER 240 Manual Del Usuario

Safety

Safety rules to avoid the explosion possibility

Never switch on the compressor with defective safety valve.
Do not expose the compressor to high temperatures, above 100 °C.
Do not operate the compressor in explosion hazard areas and rooms.
Make sure that the compressor is not absorbed flammable, corrosive or toxic gases.
If the pressure in receiver exceeds the maximum rate (see "Technical data" starting from page 7), and the
compressor does not switch off automatically:
Switch off the compressor.
Remove the power plug to avoid unpremeditated switching on.
Relieve pressure from receiver.

Safety rules to avoid the fire possibility

Do not operate the compressor close to open fire.
Do not allow piceous items and materials presence close to the compressor.
Make sure that the compressor is not absorbed flammable, corrosive or toxic gases.

Safety rules to avoid the compressor failure

The compressor should never operate without air filter.
Do not hit with metal or sharp items on the working or indicator elements. This can lead to breakage.
Never open the casing of the compressor. Leave all repairs only to qualified service personnel.
Do not use the compressor if it is faulty. Invite qualified maintenance workers to check and repair before
restart the compressor.
Make sure that the compressor is not absorbed flammable, corrosive or toxic gases.
Switch off the compressor before pull out the power plug.
Check whether the line voltage correspond to characteristics on the plate.
Never open the casing of the compressor. Leave all repairs only to qualified service personnel of the
company PREBENA.
6