Safety Rules To Avoid The Explosion Possibility; Safety Rules To Avoid The Fire Possibility; Safety Rules To Avoid The Compressor Failure - Prebena PKT Fillmaster 400 Manual De Instrucciones Original

Safety rules to avoid the explosion possibility

 Never switch on the compressor with defective safety valve.
 Do not expose the compressor to high temperatures, above 100 °C.
 Do not operate the compressor in explosion hazard areas and rooms.
 Make sure that the compressor is not absorbed flammable, corrosive or toxic gases.
 Do not fill defective cartridges!
If the pressure in receiver exceeds the maximum rate (see "Technical data" starting from page 8), and the
compressor does not switch off automatically:
Switch off the compressor.
 Remove the power plug to avoid unpremeditated switching on.
 Relieve pressure from receiver.

Safety rules to avoid the fire possibility

 Do not operate the compressor close to open fire.
 Do not allow piceous items and materials presence close to the compressor.
 Make sure that the compressor is not absorbed flammable, corrosive or toxic gases.

Safety rules to avoid the compressor failure

 The compressor should never operate without air filter.
 Do not hit with metal or sharp items on the working or indicator elements. This can lead to breakage.
 Never open the casing of the compressor. Leave all repairs only to qualified service personnel.
 Do not use the compressor if it is faulty. Invite qualified maintenance workers to check and repair before
restart the compressor.
 Make sure that the compressor is not absorbed flammable, corrosive or toxic gases.
 Switch off the compressor before pull out the power plug.
 Check whether the line voltage correspond to characteristics on the plate.
 Never open the casing of the compressor. Leave all repairs only to qualified service personnel of the
company PREBENA.
Safety
7