Festo Servo Motor Controller EduTrainer Instrucciones De Servicio página 30

•
The device is not equipped with an integrated fuse unless otherwise specified in the technical data.
•
Always pull on the plug when disconnecting connecting cables; never pull the cable.
•
Hazard-free operation of the device is no longer possible in the case of:
– Visible damage
– Malfunction
– Incorrect storage
– Incorrect transport.
– Switch off the power supply immediately.
– Protect the device against inadvertent restart.
Operating the EduTrainer
• Unintended operating state!
High-frequency radiation, e.g. from mobile phones, may trigger unintended operating states.
• Read the operating instructions carefully!
These devices may only be worked on by suitable, qualified personnel, and only after they have
familiarized themselves with all safety, installation, operating, and maintenance instructions included in
this manual. Successful and safe operation of the device depends on its proper handling, installation,
use, and maintenance.
•
Operate the device exclusively on the EduTrainer
equivalent protective device.
• Warning
This device conducts dangerous voltage and controls rotating mechanical parts, which may also be
dangerous. Disregard of the warnings or non-observance of the instructions included in this manual
may result in life-threatening danger, severe bodily injury, or major material damage.
30
® Servo Motor Controller
three-phase supply (Festo Order Number 571812) or
®
© Festo Didactic 8090920