dirna Bergstrom bycool green line COMPACT 3.0 Manual Del Usuario página 10

COMPACT 3.0
EN
Función F0 - Manual Operation of the equipment, at intermediate power.
P0 Manual Operation , Maximum power.
F0
The user can choose the comfort temperature and change the unit's blower speed
manually. If the vehicle's engine is running or started up, the unit will automatically
p0
pass into mode in a brief period of time.
NOTE: This function,
the unit. This function can also be automatically activated by the unit with the vehicle's
engine off whenever it detects that the batteries are well charged. The unit will remain in
this mode for a time after passing into selected
Comfort temperature can be controlled by briefly pressing the control keys
of the remote control. The blower speeds can be controlled by keeping the
-
+ keys of the control panel pressed down or from
the display showing
Function F1 - Digital thermometer function.
In this function, the Compact 3.0 N&D will indicate on the screen the temperature inside the
cabin.
Function F2 - Time Programming Function.
F2 programmes the unit to disconnect automatically during a period of time between 1
and 9 hours. To programme it, keep the On/Off
screen, select the operating time with the
.
Function F4 Automatic Operation of the Unit, at intermediat power
p4 Automatic Operation of the unit at maximum power
When selecting F4 the symbol CA will appear on the display alternating between the
selected temperatures. The user can choose the comfort temperature manually. With
this function, the unit regulates automatically its performance parameters until the
chosen comfort temperature is achieved. If the engine is running or the engine starts
running, the unit will automatically change onto the P4 mode within a short period
of time.
p0
, cannot be selected manually. It is automatically activated by
V1 V2 V3 V4
, , ,
10
F0
mode.
V5
, .
pressed until F2 appears on the
-
+ keys and confirm by pressing On/Off
+
on the remote control, with
®
-
or