Publicidad
Idiomas disponibles
Idiomas disponibles
15. Disconnect the electrical connector from the headlamp
switch and from the DIC switch, if optioned (2).Figure 5
FIGURE 5
16. Remove headlamp switch from headlamp switch trim plate
assembly.
17. Install new headlamp/fog lamp switch into headlamp switch
trim plate assembly.
18. Connect electrical connector to new headlamp/fog lamp
switch and to DIC switch, if equipped.
For vehicles with RPO SLT instrument panel.
19. Install headlamp switch trim plate assembly to instrument
panel. Figure 6
FIGURE 6
Fog Lamp Kit
ALL INFORMATION WITHIN
DATE
ABOVE BORDER TO BE PRINTED
EXACTLY AS SHOWN ON 8.5 x 11
WHITE 16 POUND NON-BOND
RECYCLABLE PAPER.
PRINT ON BOTH SIDES, EXCLUD-
ING TEMPLATES.
TO BE UNITIZED IN ACCOR-
DANCE WITH GMSPO SPECIFI-
CATIONS.
REVISION
AUTH
For vehicles without RPO SLT instrument panel.
20. Install left side switch trim plate assembly to instrument
panel (1). Figure 7
FIGURE 7
21. Install knee bolster to instrument panel (3). Figure 8
FIGURE 8
PART NO.
IR 31JL07
INSTALLATION INSTRUCTIONS
DR
TITLE
PART NO.
19170448
6200 Grand Pointe Dr., Grand Blanc, MI 48439
19170448
SHEET
Fog Lamp Kit
2
SHEET
2
15
OF
15
OF
Publicidad
