Descargar Imprimir esta página

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

DESCRIPTION
SILL PLATE
ALCOHOL PREP PAD
INSTALLATION INSTRUCTIONS
Tools Required
Soft, Lint-Free Towels
Heat Gun (If required)
Masking Tape
Preparation - Before Installation
1. If existing parts are installed, carefully remove them. Use approved adhesive remover (VMP Naptha), to remove any adhesive
residue.
2. After opening the kit, check to see if any parts are missing and that the product is not damaged.
3. This product should be installed with proper installation tools.
4. Install this product while observing all warnings and precautions stated in this instruction sheet.
5. Thoroughly wash entire surface area where parts will be adhered to.
6. Temperature of sill plates and the vehicle must be 70ºF to 90ºF (21°C to 32°C).
Installation Procedure
1. Wipe area (1) where the sill plate is to be applied using supplied alcohol prep pad and follow with a dry wipe to remove any
residual alcohol.
Chevrolet Bolt - Sill Plate
ALL INFORMATION WITHIN
DATE
ABOVE BORDER TO BE PRINTED
EXACTLY AS SHOWN ON 8.5 x 11
26FE16
WHITE 16 POUND NON-BOND
RECYCLABLE PAPER.
PRINT ON BOTH SIDES, EXCLUD-
ING TEMPLATES.
TO BE UNITIZED IN ACCORDANCE
WITH GM SPECIFICATIONS.
Side Door Sill Trim Plate Package Installation
QUANTITY
2
2
1
REVISION
Initial Release - Jinhyeok Kang
IR 26FE16
INSTALLATION INSTRUCTIONS
AUTH
DR
TITLE
2392269
PART NO.
42505939
PART NO.
Chevrolet Bolt - Sill Plate
42505939
1
9
SHEET
OF
1
9
SHEET
OF

Publicidad

loading

Resumen de contenidos para GM 42505939

  • Página 1 Chevrolet Bolt - Sill Plate EXACTLY AS SHOWN ON 8.5 x 11 26FE16 Initial Release - Jinhyeok Kang 2392269 WHITE 16 POUND NON-BOND RECYCLABLE PAPER. PRINT ON BOTH SIDES, EXCLUD- ING TEMPLATES. 42505939 PART NO. TO BE UNITIZED IN ACCORDANCE SHEET WITH GM SPECIFICATIONS.
  • Página 2 Chevrolet Bolt - Sill Plate EXACTLY AS SHOWN ON 8.5 x 11 26FE16 Initial Release - Jinhyeok Kang 2392269 WHITE 16 POUND NON-BOND RECYCLABLE PAPER. PRINT ON BOTH SIDES, EXCLUD- ING TEMPLATES. 42505939 PART NO. TO BE UNITIZED IN ACCORDANCE SHEET WITH GM SPECIFICATIONS.
  • Página 3 Chevrolet Bolt - Sill Plate EXACTLY AS SHOWN ON 8.5 x 11 26FE16 Initial Release - Jinhyeok Kang 2392269 WHITE 16 POUND NON-BOND RECYCLABLE PAPER. PRINT ON BOTH SIDES, EXCLUD- ING TEMPLATES. 42505939 PART NO. TO BE UNITIZED IN ACCORDANCE SHEET WITH GM SPECIFICATIONS.
  • Página 4 Chevrolet Bolt - Sill Plate EXACTLY AS SHOWN ON 8.5 x 11 26FE16 Initial Release - Jinhyeok Kang 2392269 WHITE 16 POUND NON-BOND RECYCLABLE PAPER. PRINT ON BOTH SIDES, EXCLUD- ING TEMPLATES. 42505939 PART NO. TO BE UNITIZED IN ACCORDANCE SHEET WITH GM SPECIFICATIONS.
  • Página 5 Chevrolet Bolt - Sill Plate EXACTLY AS SHOWN ON 8.5 x 11 26FE16 Initial Release - Jinhyeok Kang 2392269 WHITE 16 POUND NON-BOND RECYCLABLE PAPER. PRINT ON BOTH SIDES, EXCLUD- ING TEMPLATES. 42505939 PART NO. TO BE UNITIZED IN ACCORDANCE SHEET WITH GM SPECIFICATIONS.
  • Página 6 Chevrolet Bolt - Sill Plate EXACTLY AS SHOWN ON 8.5 x 11 26FE16 Initial Release - Jinhyeok Kang 2392269 WHITE 16 POUND NON-BOND RECYCLABLE PAPER. PRINT ON BOTH SIDES, EXCLUD- ING TEMPLATES. 42505939 PART NO. TO BE UNITIZED IN ACCORDANCE SHEET WITH GM SPECIFICATIONS.
  • Página 7: Descripción

    Chevrolet Bolt - Sill Plate EXACTLY AS SHOWN ON 8.5 x 11 26FE16 Initial Release - Jinhyeok Kang 2392269 WHITE 16 POUND NON-BOND RECYCLABLE PAPER. PRINT ON BOTH SIDES, EXCLUD- ING TEMPLATES. 42505939 PART NO. TO BE UNITIZED IN ACCORDANCE SHEET WITH GM SPECIFICATIONS.
  • Página 8 Chevrolet Bolt - Sill Plate EXACTLY AS SHOWN ON 8.5 x 11 26FE16 Initial Release - Jinhyeok Kang 2392269 WHITE 16 POUND NON-BOND RECYCLABLE PAPER. PRINT ON BOTH SIDES, EXCLUD- ING TEMPLATES. 42505939 PART NO. TO BE UNITIZED IN ACCORDANCE SHEET WITH GM SPECIFICATIONS.
  • Página 9 Chevrolet Bolt - Sill Plate EXACTLY AS SHOWN ON 8.5 x 11 26FE16 Initial Release - Jinhyeok Kang 2392269 WHITE 16 POUND NON-BOND RECYCLABLE PAPER. PRINT ON BOTH SIDES, EXCLUD- ING TEMPLATES. 42505939 PART NO. TO BE UNITIZED IN ACCORDANCE SHEET WITH GM SPECIFICATIONS.