Publicidad
Idiomas disponibles
Idiomas disponibles
Important: Hand pressure may not provide the necessary "wet out".
5. Apply firm pressure onto the plates (1) starting from center and moving outboard. Use firm, overlapping strokes and apply
pressure around the perimeter of the plate multiple times.
6. For optimum performance, use a heat gun to apply heat (120°F for 3 seconds) across the surface of the plate and then re-
press into place with felt block.
7. Repeat steps 1 through 6 for the remaining sill plates.
Chevrolet Bolt - Sill Plate
ALL INFORMATION WITHIN
DATE
ABOVE BORDER TO BE PRINTED
EXACTLY AS SHOWN ON 8.5 x 11
26FE16
WHITE 16 POUND NON-BOND
RECYCLABLE PAPER.
PRINT ON BOTH SIDES, EXCLUD-
ING TEMPLATES.
TO BE UNITIZED IN ACCORDANCE
WITH GM SPECIFICATIONS.
REVISION
Initial Release - Jinhyeok Kang
IR 26FE16
INSTALLATION INSTRUCTIONS
AUTH
DR
TITLE
2392269
PART NO.
42505939
PART NO.
Chevrolet Bolt - Sill Plate
42505939
3
9
SHEET
OF
3
9
SHEET
OF
Publicidad
