Faber Cylindra CYLN15SS600 Instrucciones De Instalación Información De Uso Y Cuidado página 14

1.
Disconnect and move freestanding range from cabinet opening
4
to provide easier access to rear wall. Put a thick, protective
covering over cooktop, set-in range or countertop to protect
from damage or dirt.
2.
Draw a Horizontal line at a minimum of 41 5/16" above the
Cooktop.
3.
Mark 2 holes at 3 15/16" to the right and left of this line.
Check that the two marks are level, before drilling.
4.
Mark a reference point at 15 3/8" above the 41 5/16" line and
mark 2 holes 3 15/16" to the right and left of this line.
Check that the two marks are level, before drilling.
NOTE:The grey part is only for
14
rear venting method.
30" 24"