Faber Cylindra CYLN15SS600 Instrucciones De Instalación Información De Uso Y Cuidado página 22

3. Put the Damper in the pipe and seal with foil tape.
4. Put the Pipe with Damper in the air outlet hole.
5. Attach the Blower into the Motor Support
removed previously. Attach the screws
screws
6. Secure the pipe in to the wall with foil tape.
Torx Screwdriver
Phillips Screwdriver
22
. Secure the damper to the motor with foil tape.
2
. Use the 4 screws
F
first and then attach the top
1
2
1
F