Preparing To Mount The Range Hood - Faber Cylindra CYLN15SS600 Instrucciones De Instalación Información De Uso Y Cuidado

PREPARING TO MOUNT THE RANGE HOOD

DRAW POSITIONING LINES
3
Draw a vertical line H on the supporting wall to the ceiling or
upper limit, at the center of the area in which the hood will be
installed.
Draw a horizontal line I where the bottom edge of the hood will
be located, a minimum of 24" above an electric cooking surface
and 30" above a gas cooking surface.
H
I
MIN. 24" OVER ELECTRIC/MIN. 30" OVER GAS
13