Connecting House Power - Faber Cylindra CYLN15SS600 Instrucciones De Instalación Información De Uso Y Cuidado

CONNECTING HOUSE POWER

1. Remove the cover from the Field Wiring Box
with a phillips screwdriver.
2. Feed the Power Supply Cable through the electrical
knockout.
3. Connect the Power Supply Cable to the Range Hood.
4. Attach the White lead of the power supply (A) to the
White lead of the Range Hood (D) with a twist-on type
wire connector.
5. Attach the Black lead of
the power supply to the
Black lead of the Range
Hood (B) with a twist-on
type wire connector (C).
6. Connect the Green (E)
(Green and Yellow)
ground wire under the
Green grounding screw.
7. Replace the field wiring
compartment cover.
30
Hood
wiring