Oster 5960 Manual De Instrucciones página 6

HOW TO POUR
1. Grab the handle making sure the water release button is reachable.
2. Lift kettle.
3. Press water release button in and pour.
4. When finished pouring, release the button.
USING YOUR OSTER® ELECTRIC KETTLE
1. Position the power base on a flat, heat resistant surface, as close as possible to a
power outlet.
2. Follow cord routing in power base according to exit patterns. Proper cord routing will
result in the power base laying flat when kettle is placed in base. DO NOT operate
kettle if power base is not flat. Remove kettle from power base and repeat cord
placement instructions.
3. To fill with water, open the lid. Fill the kettle with water up to the "MAX" water level
mark. NOTE: Do not exceed the "MAX" water level mark indicated on the water
window.
4. Plug the electric cord into an electric outlet. Turn the switch on by pushing up on the
I/O switch. The light will light up to indicate the unit is on. The water will heat and the
electric kettle will switch off automatically when the water has boiled. NOTE: Ensure
the I/O switch is clear of obstructions and the lid is firmly closed. The electric
kettle will not turn off automatically if the I/O switch is constrained, or if the lid
is left open.
5. Carefully lift the kettle from the power base and pour the boiling water.
NOTE: The kettle will not re-boil until the on/off switch "I/O" is again switched on "I". Wait
15-20 seconds, allowing kettle to cool down, and then switch on.
All manuals and user guides at all-guides.com