Fein WSG 20-180 Manual De Instrucciones página 13

WSG 20-180/230 - Buch Seite 13 Donnerstag, 1. Februar 2001 4:21 16
WSG 20-180 / WSG 20-230
Maintenance and repairs.
!
Risk of injury
Service, testing and repairs may only be car-
ried out by electrical engineers in conformity
with the regulations valid in the respective
country.
Maintenance and repairs.
We recommend our customer service
department (repair centre), FEIN author-
ized service centres and agencies.
Addresses can be found at the end of
these operating instructions and in the
enclosed safety instructions.
Please hand these operating instructions
to the repair centre. An overview of spare
parts can be found at the end of these
operating instructions.
Upon request a repair manual is sent to
the electrical engineers.
Only use original FEIN spare parts.
Spare parts.
The overview of spare parts is at the end
of these operating instructions. Quoting
the parts no. (1), order no. (2) as well as
the number of spare parts (3) facilitates
the ordering procedure.
Accessories.
Illustrations and order numbers can be
found at the end of these instructions.
Description of the accessories:
A Rough grinding disc, bent at right angles
for steel.
B Rough grinding disc, bent at right angles
for NE metals.
C Rough grinding disc, bent at right angles
for stone.
D Cut-off grinding disc for steel.
E Cut-off grinding disc for stone.
F Elastic backing pad with flange M 14.
G Flange M 14 for elastic backing pad and
plaited conical brush.
H Fibre sanding sheets with differing
grain.
I Fan-like grinding sheets, packet with
10 sheets.
J Inner flange.
K Threaded flange for rough grinding,
cut-off grinding and fan-like grinding
discs, and also for twist brushes.
L Protective guard for extraction, with
guide block.
M Open-jawed spanner SW 17.
N Face spanner.
O Metal carry case
(690 x 240 x 160 mm).
Guarantee.
FEIN power tools are guaranteed in
accordance with statutory and national
regulations (evidence of purchase by
invoice or delivery note).
Damage caused by improper handling,
overload or normal wear shall be
excluded from the guarantee.
Please contact our customer service
(repair centre), FEIN authorized service
centres or agencies.
EN
13