Cameo ZENIT W600 SMD Manual Del Usuario página 16

AUTO MODE (Auto Program 1 – 6)
The 6 different auto programs each comprise non-editable color-change sequences. Brightness
and speed are independently adjustable. Select auto mode as described above under „CONFI-
GURE STANDALONE MODE" and confirm with ENTER. Now use UP and DOWN to select one of
the 6 auto programs (observe arrow) and confirm with ENTER. To adjust brightness, use UP and
DOWN to select the menu item Dim and confirm with ENTER, then use UP and DOWN to select
the desired value between 000 and 255. Confirm with ENTER. Set the run speed by selecting the
menu item Speed, confirm with ENTER, and then select the desired value between 001 and 100.
Confirm with ENTER.
COLOR MACROS (Color Macro)
15 different preset color macros are available. Select Color Macro as described above under
CONFIGURE STANDALONE MODE and confirm with ENTER. Using the UP and DOWN controls, now
select the desired color preset (observe arrow) and confirm with ENTER (Color Off = blackout). A
three-digit figure is shown on the display, and you can set the desired brightness on a scale from
000 to 100 using UP and DOWN. Confirm with ENTER.
16