Cameo ZENIT W600 SMD Manual Del Usuario página 18

USER PRESETS (User Color)
The operating mode "User Presets" allows you to store five individual color presets of overall
brightness, strobe and a color mix of R, G, B and W directly in the device. Select User Color mode
as per the procedure previously described in CONFIGURE STAND ALONE MODE and confirm with
ENTER. Use UP AND DOWN to select one of the stored presets Color1 to Color5 and confirm with
ENTER and select the submenu item you want to edit (see arrows). Confirm with ENTER. The
display will show a three-digit number field and you can use the UP and DOWN controls to set the
value as required between 000 and 255. Confirm by pressing ENTER again.
PIXEL MODE (Pixels)
Pixel mode allows you to set dimmers, patterns and speed directly on the device with values from
000 to 255. Dynamic patterns can be found from value 006 to 098 and static patterns from 128
to 234. The speed of the dynamic patterns is set from 006 (fast) to 126 (slow) and in the reverse
direction from 128 (slow) to 255 (fast) (000 – 005 and 127 = stop). Select Pixel mode as per the
procedure previously described in CONFIGURE STANDALONE MODE and confirm with ENTER. Now
use UP and DOWN to select the menu item you wish to edit (observe arrow) and confirm with
ENTER. The display will now show a three-digit number field, and you can use UP and DOWN to
configure the desired value between 000 and 255. Confirm with ENTER.
18