Functional Description; Functional Parts - Grizzly Tools EGT 1440 Traducción Del Manual De Instrucciones Original

GB
cable for damage and aging.
Do not use the equipment if the
cable is damaged or worn.
• If the connecting cable to this
equipment is damaged, it must
be replaced by the manufac-
turer, the customer service of
the same, or a similarly quali-
fied person in order to avoid
hazards.
• Make sure that the mains volt-
age matches the data on the
tool's rating label.
• If possible, connect the tool to
a socket with a residual-current
circuit breaker (RCD) trip switch
at a triggering current of not
more than 30 mA.
• Avoid skin contact with
earthed objects such as metal
fences and posts.
• Make sure that the connector
on the extension cable is pro-
tected from splash water, and is
made of rubber or has a rubber
covering. Only use extension
cables that are intended for
outdoor use and are labelled
as such. Use extension cables
with a cable core diameter of
at least 2,5 square millimetre.
Always completely unwind the
cable reel before use. Check
the cable for damage.
• Use the cable hanger fitted for
the purpose when using an ex-
tension cable.
• Do not carry the tool by the ca-
ble. Do not unplug the cable by
tugging on it. Keep the cable
away from heat, oil and sharp
edges.
72

Functional description

Your hand-operated garden tiller is
equipped with a maintenance free electric
motor and a gearbox with sump lubrication.
The tool is fitted with six rotating tine
wheels that automatically dig themselves
into the ground.
The steel frame can be folded to aid storage.
Please refer to the following descriptions
for the function of the controls.

Functional parts

The major functional parts are
shown on page 2 and 3.
1 Control element
2 Release button
3 Starting lever
4 Right grip
5 Left grip
6 Upper grip handle
7 2 tightening levers for fastening
the upper grip handle
8 Mains cable
9 Middle handle bar
10 2 tightening levers for fastening
the middle handle
11 Bottom handle
12 Wheel adjustment ring
13 Protective cover
14 2 wheels
15 Cutting blade
16 Motor housing
17 Carrying handle
18 Device cable
19 2 cable clamps
20 Cable relief
21 Gears
22 Drive shaft